use variables for measurement values

[toast/airingbutler.git] / airingbutler.ino

diff --git a/airingbutler.ino b/airingbutler.ino
index c93f4ba89dad7496c546c027c24957dd18119b7a..68cd95d7338cc37ccde355ade7f056607728242d 100644 (file)
--- a/airingbutler.ino
+++ b/airingbutler.ino
@@ -18,6 +18,8 @@ MHZ19 mhz19 = MHZ19(rx_pin,tx_pin);
 LiquidCrystal lcd(7, 8, 9, 10, 11, 12);
 
 unsigned long time;
 LiquidCrystal lcd(7, 8, 9, 10, 11, 12);
 
 unsigned long time;

+int co2 = 0;
+int temp = 0;

 int lastppm = 0;
 
 
 int lastppm = 0;
 
 


@@ -62,18 +64,20 @@ void loop()
 {
        time = millis();
        measurement_t m = mhz19.getMeasurement();
 {
        time = millis();
        measurement_t m = mhz19.getMeasurement();

+       co2 = m.co2_ppm;
+       temp = m.temperature;

 
        Serial.print(time);
        Serial.print(",");
 
        Serial.print(time);
        Serial.print(",");

-       Serial.print(m.co2_ppm);
+       Serial.print(co2);

        Serial.print(",");
        Serial.print(",");

-       Serial.println(m.temperature);
+       Serial.println(temp);

 
 

-       digitalWrite(led_red_pin, m.co2_ppm >= co2_alarm_thr);
-       digitalWrite(led_yellow_pin, m.co2_ppm >= co2_warning_thr && m.co2_ppm < co2_alarm_thr);
-       digitalWrite(led_green_pin, m.co2_ppm < co2_warning_thr);
+       digitalWrite(led_red_pin, co2 >= co2_alarm_thr);
+       digitalWrite(led_yellow_pin, co2 >= co2_warning_thr && co2 < co2_alarm_thr);
+       digitalWrite(led_green_pin, co2 < co2_warning_thr);

 
 

-       if (m.co2_ppm >= co2_alarm_thr && lastppm < co2_alarm_thr) {
+       if (co2 >= co2_alarm_thr && lastppm < co2_alarm_thr) {

                digitalWrite(buzzer_pin, HIGH);
                delay(100);
                digitalWrite(buzzer_pin, LOW);
                digitalWrite(buzzer_pin, HIGH);
                delay(100);
                digitalWrite(buzzer_pin, LOW);


@@ -87,7 +91,7 @@ void loop()
                digitalWrite(buzzer_pin, LOW);
        }
 
                digitalWrite(buzzer_pin, LOW);
        }
 

-       if (m.co2_ppm >= co2_warning_thr && lastppm < co2_warning_thr) {
+       if (co2 >= co2_warning_thr && lastppm < co2_warning_thr) {

                digitalWrite(buzzer_pin, HIGH);
                delay(500);
                digitalWrite(buzzer_pin, LOW);
                digitalWrite(buzzer_pin, HIGH);
                delay(500);
                digitalWrite(buzzer_pin, LOW);


@@ -95,9 +99,9 @@ void loop()
 
        lcd.setCursor(0, 0);
        lcd.print("CO2: ");
 
        lcd.setCursor(0, 0);
        lcd.print("CO2: ");

-       lcd.print(m.co2_ppm);
+       lcd.print(co2);

        lcd.print(" ppm         ");
 
        lcd.print(" ppm         ");
 

-       lastppm = m.co2_ppm;
+       lastppm = co2;

        delay(5000);
 }
        delay(5000);
 }